What are the benefits of installing high elastic couplings in generator sets?

2022-08-03 15:48

It absorbs the impact force generated by the engine work, reduces the torsional vibration of the entire shaft system of the generator set, reduces the number of resonance revolutions, compensates for radial, angular and axial displacement offsets, and protects the generator set.

Improve the service life of the generator set and reduce the failure rate of the generator set, the customer's reputation for the product will be improved, the company's product reputation will be improved, and the sales volume of the generator will be increased.

When the torque of the engine is greater than the reverse stress of the generator, the coupling will be disconnected to allow the engine to idle and protect the generator set.

Overspeed, overload, emergency shutdown, protect the generator under the circumstances, prevent the deformation of the engine shaft, the damage of the generator, the pounding of the engine, the melted piston, and the deformation of the crank connecting rod in the above situations of the generator set.

The specific benefits of using high elastic are shown in the following areas: due to the reduction of the torsional vibration of the entire shafting,

1. The service life of the engine bolts is increased, which brings the benefits that the leakage of the exhaust branch pipe is reduced, and the number of replacements of the exhaust branch pipe gasket is reduced.

2. The sealing effect of the whole machine is improved, the upper solid cover and the middle solid cover are leaking oil, the observation hole of the oil pan sees oil, the actuator disc falls off, and the air mixer disc falls off.

The spark plug loosened due to excessive vibration, fell off, and sprayed flying.

Due to the large vibration of the turbocharger, the oil seeps, causing fire, the bolts of the intake pipe are loose, and the sealing is deteriorated, resulting in air leakage of the intake air. Shooting, tempering, the fixing bolt of the starter motor is loose, and the flywheel teeth are broken when starting.

 

Previous:

National standard for hydraulic safety couplings

Next:

The working principle of the hydraulic locking sleeve of the machine tool spindle

Return to List